 |
All Black Nylon Strain Relief
Fittings, Cable Glands, Cord Grips & Fittings (Dome only) are
manufactured with a NEW ULf1 / UL f1 (746C), UV
Stable material. This new UV/V0 material is built for the Solar,
Photovoltaic, Outdoor Industries.
Need Assistance? Speak with our technial sales staff
800-456-9012 |
IMPORTANT:
Design Parameters: Cable diameter should not be less than 80% of
hole diameter and the difference between hole and cable diameter
should never exceed .04" (1 mm). The Multi Cable fittings will meet
NEMA 4x = IP65 if the design parameters are complied with.
To verify a submersible NEMA 6= IP68 application, the final assembly
of cables and fittings must be tested by the customer or submitted
at the customer's expense to an independent test lab or Sealcon for
certification.
|
|
SPECIAL INTEREST:
Any special insert hole configuration is available for a 1-time
set-up fee & a minimum order of 1,000 pieces. For small quantities,
we suggest drilling the frozen solid plug insert, using the fitting
as a fixture. |
|
|
