Technical Data

-   Control cables, special PVC

-   Requirements adapted to

DIN VDE 0245, 0281, 0293, 0295

-   Temperature range

flexing                             - 5°C to +80°C

fixed installation             -40°C to +80°C

-    Nominal voltage U₀/U 300/500 V

-    Test voltage 4000 V

-    insulation resistance
min. 20 MOhm x km

-    Minimum bending radius

for permanent approx. 7,5xcable 0

-   Radiation resistance

up to 80x10⁶ cJ/kg (up to 80 Mrad)

-  The materials used in manufacture are

cadmium-free and contain no silicone and

free from substances harmful to

  the wetting properties of lacquers

Cable structure

-    Bare copper, fine wire conductors, according to DIN VDE 0295 cl. 5 and IEC 60228 cl. 5

-    Core insulation of special PVC Z7225

-    Black cores with continuous white numbering according to DIN VDE 0293 (available with other core colors)

-    Green-yellow earth core in the outer layer (3 cores and above)

-    Cores stranded in layers with optimal lay-length

-    Outer sheath of special PVC, TM2 to DIN VDE 0281 part 1 and HD 21.1, color gray

-    Extensively oil resistant Chemical Resistance - see table Technical Information

-    PVC self-extinguishing and flame retar dant, test method B according to

    VDE 0472 part 804 and IEC 60332-1

Application

These cables are used for flexible use for medium mechanical stresses with  free movement without tensile stress or forced movements in dry, moist and wet rooms but not suitable for open air, as measuring and control cable in tool machines, conveyor belts, production lines in machinery production, in air-conditioning and in steel production. The cores have been numbered in such a way that there is no difficulty in recognizing them, even if only a small piece of sheathing has been removed. The numbers have been underlined to avoid confusion. The earth core is laid in the outer layer. Selected PVC-compounds guarantee a good flexibility as well as an economic and fast installation.