IMPORTANT:
The Multi Hole fittings will meet NEMA 4x = IP68 if the design parameters are complied with. To verify a submersible NEMA 6 = IP68 application, the final assembly of cables and fitting must be tested by the customer or submitted at the customer's expense to an independent test lab or for certification.

DESIGN PARAMETERS:
Cable diameter should not be less than 80% of hole diameter and the difference between hole and cable diameter should never exceed .04" (1 mm).

SPECIAL INSERTS:
For a minimum of 1,000 pieces any special insert hole or profile configurationis available. For small quantities we suggest drilling or machining the frozen solid plug insert, using the fitting as a fixture.