Offset (360 Rotation)




New Item!

Light Duty
Two Round Ends

FEATURES: Small, lightweight, economical locking hub that is still extremely durable. Made of black thermoplastic, these Adjustable Locking Hubs are rotary bearings that provide positive locking at any 15 increment. Once locked, the hub becomes an absolutely rigid joint, able to withstand 7 ft-lbs of torque (5:1 safety factor). Applications include adjustable fixtures, rotating fixtures, trunnion mounting, adjustable handles, foldable handles, adjustable part trays, adjustable shelves, adjustable racks, adjustable and/or fold-away work surfaces, positive positioning of lighting or nozzles, and collapsible structures. Patent numbers 5,586,363 and 5,689,999. Other patents pending.

OFFSET MODEL: Available only as an offset model. Hub extensions are offset to allow full 360 rotation. Offset hubs should usually be used in pairs, to avoid off-center loading on a single hub and ensure full strength. Make sure that rotating loads are balanced.

MOUNTING: The version shown here has round hub extensions to fit 5/8" ID pipe or tubing (snap-on fit).

SAFETY PRECAUTIONS: Avoid any possible pinch points, especially with heavy loads. Do not release the hub unless adequate support for the load is in place. Do not let loads swing freely. When using offset hubs that can rotate 360, always ensure that loads are balanced in the rotational axis.

MATERIAL: Body > Black thermoplastic (Dupont Zytel). Pins > Stainless steel.